1969 big block charger power steering pump brackets??????????

[shovelcharger]

i recently had a 440 built that is from a 75 motorhome. so im told. i made the mistake of not taking pics b4 it was disassembled. i have a shit ton of brackets left over and cant figure out the ps pump one. i have it mounted to the pump and cant figure out where the hell it goes on the engine. looks like one goes to the motor mount. please help.

[A383Wing]

mounts to the ear on the water pump housing

Bryan

[shovelcharger]

my mount .doesnt look like that one. it has like a crab claw on the end of it. ars there a few different ones?

[472 R/T SE]

Is it the same pump as the one Bryan posted or is it the other one?

I just found out what that square hole is for.  Pretty ingenious actually.

[JB400]

Is it the same pump as the one Bryan posted or is it the other one?

I just found out what that square hole is for.  Pretty ingenious actually.

I went to the local metal supply place and got a piece of 3/8 square rod made up that is a couple feet long and had the bend in it to where it has the profile of a 3/8 ratchet.  Works great for the serpentine pulleys.  I need to get one made up for a 1/2 as well.

[Cooter]

my mount .doesnt look like that one. it has like a crab claw on the end of it. ars there a few different ones?

SOME, not all, truck mounts are different, as well as A/C Vs Non A/C is different too. You can make 'em work, but it's just that making 'em work. I think you have the style that looks alot like the Small Block Alt. bracket that bolts down low IIRC.

[hemi71x]

If you have a 69 Charger with a FEDERAL PS pump, then the bracket looks like this one in my picture.