News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Wilwood Issue

Started by freddyd02, March 31, 2013, 10:17:53 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

freddyd02

March 31, 2013, 10:17:53 PM
Hey guys not sure if this has been posted before but I'm having trouble with my wilwood disc conversion. I installed the hub and rotor assembly onto the spindle and when i go to install the caliper the body of the caliper holes hits the body of the caliper bracket.. I attached two pics, sorry their not the best. Anyone have this issue? I cant seem to find a solution. I'm going to call Wilwood in the morning and see what they say..  :'(

freddyd02

#1
March 31, 2013, 10:18:34 PM
I forgot to mention this is for the front brakes..

Patronus

#2
April 02, 2013, 08:09:38 AM
Hard to tell from the pics, but looks like you need to shim the bracket over. Try a washer between the two.
'73 Cuda 340 5spd RMS
'69 Charger 383 "Luci"
'08 CRF 450r
'12.5 450SX FE

bill440rt

#3
April 02, 2013, 08:22:54 AM
Is the caliper bracket mounted on the correct side of the spindle?
"Strive for perfection in everything. Take the best that exists and make it better. If it doesn't exist, create it. Accept nothing nearly right or good enough." Sir Henry Rolls Royce
Print
Go Up Pages1
User actions