News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

rallye vs non rallye dash wiring

Started by AmadeusCharger500, February 18, 2006, 11:12:31 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

AmadeusCharger500

February 18, 2006, 11:12:31 PM
What would be the difference is there between the 2 harnesses?

Nacho-RT74

#1
February 19, 2006, 01:14:24 AM
standart usesa big round plug with 12 holes to plug the complete harness up to a printed circuit board.

Rallye uses a different wire to every different function on cluster with female L shaped bullet terminals... also wired sockets.

Another difference is that Rallye guages are feeded on Acc and RUN ignition switch position... Standart gauges are only feeded on RUN position
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

AmadeusCharger500

#2
February 19, 2006, 08:17:23 AM
is this a rallye guage or not? How do you tell?

Nacho-RT74

#3
February 19, 2006, 11:00:01 PM
Damn.. I allways think on a 3rd gen Charger... I was forgett you were talking about a Challenger...

That is a standart cluster. I don't have a Rallye cluster pic, but is with two big gauges (speedo and Tach/clock ) with steering colum in the middle of both
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html
Print
Go Up Pages1
User actions