News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Need some specs

Started by original72, February 19, 2006, 03:23:19 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

original72

February 19, 2006, 03:23:19 PM
working on a project that might be fruitful but i need some measurements.... on a 440 block with the heads on..... i need the measurements from bottom of intake port on pass side to bottom of intake port on drivers side.... and the same for tops of intake ports.... easier then trying to get them from a intake where it will be approximate cause of the bends of the intake...... so if someone has their intake off the engine.....  thanks in advance for any help....

Bill
Print
Go Up Pages1
User actions