Auto to 5 - 6 speed manual.

[artiec1]

I'm thinking about pulling the 727 and going with the Tremec 5 speed setup. Is the end of the crank drilled to accept a 5 speed flywheel? I'm not sure about this. I will probably go for the complete conversion from auto to 5 or 6 speed. Is there any difference in the crank end where the flywheel bolts on between a 4 spd and a stick , or are the drilled the same?

Anyone done this, and if so any advice appreciated.

Thanks

Artie

[Rolling_Thunder]

doesnt really matter if it's drilled of not - modern 5-speed do not have a long input shaft snout like the older A833 transmissions.  Any kit you buy should work fine.