Valley pan

[twodko]

I finally got around to installing a heat block off valley today. What a difference, starts right up full temp. Seems to run smoother (prolly small vac leak before), sounds much better and it likes to go......very quickly now. 

[johnnycharger]

Wooo Hooo! Awesome Tom! 

[hatersaurusrex]

Pics for those of us who may need to do this in the future?

[Fred]

 

[tan top]

 

[bakerhillpins]

Pics and Part #s 

Did you go to an insulated carb spacer as well? Which one did you use if you did?

[Cooter]

I did this mod as well, and seems to be the bees knees so far. Makes it a little harder to keep running when cold, but not something I'm gonna fret over.

[firefighter3931]

I've been using the 1215 Felpro intake gasket for years. 

http://www.dodgecharger.com/forum/index.php/topic,52284.0.html



Ron

[twodko]

Yep, felpro 1215 kit from summit racing. After masking off the mating surfaces I sprayed it with hemi orange. No phenolic spacer....running an edlebrock carb.

[bakerhillpins]

Thanks for the #s.  I was interested to see if you used a different mfg than Ron mentioned. 

[greenpigs]

Pics and Part #s 

Did you go to an insulated carb spacer as well? Which one did you use if you did?

I run a 1/2 inch 4 hole phenolic spacer, Summit brand, and the block off valley pan with my Edlebrock 750.

[tan top]

yep felpro 1215  valley tray , edelbrock 800 AVS  with a weiand stealth intake  for me 

also use this  heat insulating gasket  below  

http://chucker54.stores.yahoo.net/hein4sqboe.html